EQUIPMENTS

Polyurethane Sports Coatings

Standing System

 

Epoxy Floor Coatings

Polyurethane Sports Grounds coatings

Color road coating

 

DESCRIPTION
COURTSOL STANDING is an acrylic 3-coats system for surfacing new or old tennis courts and other sport-grounds.
COURTSOL STANDING combines 2 flexible base and intermediate coats, with an anti-skid and wear-resistant top coat.
The whole system enables to obtain a performant playing surface.
SCOPE OF USE
Works : New, renovation or maintenance by regeneration of old acrylic coatings.
According to the XP P 90-110 French standard and the Specifications for use of COURTSOL systems attached to the sale of this kind of products.
Site : exterior or interior.
Intended purposes : Tennis courts and sport-grounds of similar use.
Well prepared surfaces and in accordance with the standard XP P 90-110 or the Specifications FFT/FNCESEL :
Hot mix asphalt.
Cold mix asphalt, exclusively indoor.
Concrete according to NF P 90-202 in interior, or according to NF P 74-203 in exterior, notably (standard completing mentioned references according to the COURTSOL Specifications) Old compatible coatings perfectly adherent to the surface.

The coating to be applied on site appeals to several products. It is not delivered like a work component to be incorporated without modification. The durability of the systems, applied according to the products recommendations and within the normal conditions of maintenance goes from 2 years to about 15 years depending on the surface being applied, their exposure and their environment. This wear life means a regular maintenance of the top coat and/or the regeneration of the coating .

 


¨C Evenly spread a coat of COURTSOL RESIBASE BP at a coverage rate of 0,5 to 1,5 kg/m2 on the whole surface with a rubber squeegee. Recoatable after 24 hours.
¨C Evenly spread a tinted coat of COURTSOL ESIBASE at a coverage rate of 600 g/m2 on the whole surface with a rubber
squeegee. Recoatable after 12 hours.
¨C Evenly spread a tinted coat of COURTSOL RESITOP at a coverage rate of 500 g/m2 on the whole surface with a rubber squeegee perpendiculary to the previous coat. Recoatable after 12 hours .

 

Suzhou Industrial Park Unican Construction Products Co.,LTD, All Rights Reserved

ADD: No.888,Baodaixilu Road, Suzhou TEL:0512-68092681 68092682 (0)13862553274 (ENGLISH) FAX:0512-68092683

http://www.sz-unican.com ¡¡¡¡E-mail:service@sz-unican.com